Metal roofing questions, answered.

In Saskatchewan, a quality standing seam metal roof typically runs $12–$18 per square foot installed, depending on roof complexity, panel profile, colour, and accessories. Asphalt shingles are cheaper up front (around $5–$8/sq ft installed) but usually need replacement in 15–20 years. A standing seam metal roof rolled on-site is engineered to last 50+ years, so the lifetime cost is normally lower. We give free, written quotes — send us your address or roof measurements and we'll price it for your specific build.

Our metal roofing and siding is available in the full prairie palette — classic blacks, charcoals, slate greys, browns, regal greens, burgundies, blues, and matte finishes. All colours come with a baked-on PVDF or SMP paint system carrying a 40-year finish warranty. See our full colour chart; we can also bring physical chip samples to your site visit so you can see the finish in real prairie sun before committing.

Corrugated (exposed-fastener) panels are screwed straight through the metal into the deck. They're cheaper but every screw is a future leak point as the rubber washers dry out — typically 15–20 years before re-screwing or replacement. Standing seam uses concealed clips that lock between raised seams, with no fasteners through the panel face. The clips also let the panel float as it expands and contracts with temperature, which matters a lot in Saskatchewan's 70°C swing. Standing seam costs more up front but lasts 2–3× longer and looks dramatically cleaner. Pair it with hidden hangers and matching trim for a fully concealed-fastener system.

A properly installed standing seam metal roof lasts 50+ years. The steel substrate is rated for that lifespan and the PVDF paint system carries a 40-year finish warranty (see the full colour palette). Exposed-fastener corrugated typically lasts 20–30 years before fasteners need to be redone. Asphalt shingles in Saskatchewan usually make it 15–20 years before hail, UV, and freeze-thaw cycles take them out.

No — not when installed properly. Metal roofs are installed over solid sheathing and underlayment, often with attic insulation between you and the roof deck. From inside the house, a metal roof is no louder than asphalt shingles. The "tin roof in rain" sound only happens on uninsulated structures like old barns where the metal sits directly on purlins.

Yes — that's exactly what it's designed for. Steel panels in 26-gauge or 24-gauge resist hail far better than asphalt shingles. Standing seam panels shed snow cleanly, which reduces ice damming, and the clip system lets the metal expand and contract without buckling through prairie temperature swings. Pair it with seamless eavestrough to keep meltwater off your foundation. Most of our roofs carry a Class 4 impact rating, the highest available, which can also lower your home insurance premium.

Most metal roofs in Saskatchewan are shipped from a distant plant in standard lengths (often 20 ft) and seamed together on the roof. Every horizontal seam is a future leak point and a place oil-canning starts. We bring our roll-former to your site and manufacture each panel as one continuous piece — ridge to eave — at the exact length your roof needs. No shipping seams, no shop-cut waste, no transport damage.

Both. We roll the panels on-site and our crews install the full system — roofing, siding, seamless eavestrough, and trim. You can also buy material-only if you have your own installer; either way the panels come off the roll-former custom-cut for your project.